How to Increase Kitchen Storage Without Expanding the Room
You can increase kitchen storage without moving a wall by changing the cabinets inside the room you already have. The moves that add the most are taller wall cabinets, drawer bases in place of door bases, a shallow pantry on a wall that currently holds nothing, and an island that stores on more than one side. Smaller gains come from choosing narrower appliances and reclaiming the space lost to fillers and corners. They are listed here roughly in order of how much each one returns.
All of these are layout decisions, made when cabinets are being replaced. If you are keeping your cabinets, skip to the last numbered section.
1. Take the wall cabinets to the ceiling
The space between the top of a short wall cabinet and the ceiling stores dust. Closing it with taller cabinets is the simplest way to get more kitchen storage in the same footprint, because it uses wall you already have.
The arithmetic is simple. By common practice, wall cabinets are hung with their bottoms about 54 inches above the floor whatever their height. A 30-inch wall cabinet then tops out at about 84 inches and a 42-inch cabinet at about 96 inches, which is the full height of an eight-foot ceiling. That is a foot of added cabinet on every upper in the room. One manufacturer's specification guide shows what the foot can buy, since its 42-inch wall cabinets come with three adjustable shelves where the 30- and 36-inch sizes have two. Shelf counts differ by line.
The trade-off is reach. The top shelf of a 42-inch cabinet needs a step stool for most people, so it becomes the place for the roasting pan, the holiday platters and the bulk paper towels. That is still a real gain, because those items are currently taking up shelves you can reach. Ceiling height, soffits and crown molding all affect which cabinet height fits, and our guide to wall cabinet heights from 30 to 42 inches works through the options.
Do not try to gain storage by hanging wall cabinets lower. That mounting height leaves about 18 inches between the countertop and the bottom of the uppers, and that working space is not worth giving up.
2. Swap door bases for drawer bases
A base cabinet with doors and one shelf has plenty of volume, but the back half of it is hard to use, so in practice it holds less than its size suggests. Drawers load front to back and open from above. Replacing two or three door bases with drawer stacks makes the storage you already have fully usable, with no change to the footprint at all.
Not every base should change. The sink cabinet, the tray cabinet and anything holding tall items stay as doors. The full comparison, including roll-out trays as a middle path, is in our article on drawers versus doors in base cabinets.
3. Build a shallow pantry wall on a dead wall
Look for a stretch of wall that carries no cabinets because a full-depth run would block a doorway or squeeze the walkway. It might be the wall opposite the main run, the side of a chimney chase or the return beside the back door. Standard base cabinets are 24 inches deep, but tall cabinets are also made 12 inches deep, and a run of those turns a blank wall into floor-to-ceiling food storage while taking only a foot from the room.
A shallow pantry is easy to use for a simple reason. On a 12-inch shelf everything sits one row deep, so nothing hides. Check the walkway that remains once the cabinets and their open doors are in place before committing. Depths, widths, door options and interior fittings are covered in our guide to kitchen pantry cabinet types.
4. Make the island store on more than one side
An island is often a row of base cabinets facing the range with a blank panel on the back. If the island is deep enough, the seating side can carry shallow cabinets under the overhang for serving pieces, table linens and small appliances, and the ends can take open shelves or a narrow cabinet. On the working side, drawer bases do better than doors for the same reason they do along the wall.
The limit is clearance. Stools need knee room, so storage under an overhang reduces how deep the seating can be, and doors on the back of an island open into the walkway behind it. Decide whether that side of the island is mainly for sitting or mainly for storing, and size the aisles first. The numbers for that are in our guide to island walkway and seating clearances.
5. Trim the appliances
Every inch of appliance width is an inch that is not cabinet. Before the plan is fixed, ask what the next size down would be for the range and the refrigerator, and weigh that against how you cook. A household that rarely uses more than four burners gives up little by choosing the narrower range, and gains a wider drawer base beside it.
Three other appliance choices affect storage.
- A microwave built into a base or tall cabinet clears the countertop, though it takes cabinet volume and needs an outlet placed by an electrician.
- A cabinet-depth refrigerator does not add cabinet space by itself, but it frees floor area that can make a pantry wall or a larger island possible.
- The cabinet over the refrigerator is often a 12-inch-deep box set far back and nearly unreachable. Manufacturers also make 24-inch-deep versions that come forward to the face of the refrigerator, which makes that cabinet usable for trays and seldom-used cookware.
Clearances around cooking appliances and ventilation are set by the appliance manufacturer's installation instructions and by local code, so cabinet changes next to a range or hood have to respect those first.
6. Reclaim fillers and corners
Fillers are the blank strips that make a run of standard-width cabinets fit a wall. Some are necessary, since doors next to a wall need room to swing, but a run planned with the right mix of cabinet widths needs fewer and narrower ones. Where a filler of a few inches is unavoidable, a filler pull-out can put it to work.
Corners are the other place volume disappears. Depending on how much wall each side can spare, the answer may be a lazy Susan, a blind corner with a pull-out or, in a small room, no corner cabinet at all with wider drawers on both sides. Those choices are compared in our guide to kitchen corner cabinet solutions.
7. Organize inside the boxes
Once the layout holds as much as it can, fittings inside the cabinets decide how much of that volume you use day to day. A trash pull-out takes the bin off the floor, a tray divider stands sheet pans on edge, and peg systems let a deep drawer hold dishes. This is also the one step available if you are keeping your existing cabinets, although factory fittings are sized to particular cabinet widths. Our article on cabinet organizers and the cabinets they fit lists which accessory needs which box.
Where to start if the budget covers only part of the list
If new cabinets are already planned, taller wall cabinets and drawer bases come first, because they change the cabinets you were buying anyway. The pantry wall is next, since it adds cabinets where there were none. Island and appliance changes depend on the room and are worth pricing as options.
What does not belong on the list is squeezing the walkways. A kitchen that stores more but cannot be walked through comfortably with the dishwasher open has traded one problem for another.
Test the moves on your actual room
Each idea above competes with the others for the same walls, and the only reliable way to compare them is to draw them. Aqua Kitchen's designers measure your kitchen, model it in 3D and revise it with you at no cost, so you can use the complimentary 3D design to see the same room with 42-inch uppers, with a pantry wall, or with a reworked island before choosing. Cabinet heights and depths vary by manufacturer, and you can browse the options in our kitchen cabinets by line and finish.
