Kitchen Pantry Cabinet Ideas for Better Everyday Storage
A kitchen pantry cabinet earns its floor space when you can see and reach everything in it without unloading the front row. That happens in one of two ways. Either the cabinet is deep (24 inches) and the storage slides out to you on roll-out trays or a pull-out frame, or the cabinet is shallow (about 12 inches) and every item sits one row deep on a shelf. A deep tall cabinet with nothing but fixed shelves is the version to avoid, because the back half of each shelf turns into long-term storage.
Sizes differ by manufacturer and by line, so treat the dimensions below as planning numbers and confirm them against the specification for the cabinets you choose.
Decide the depth before anything else
Stock tall cabinets are commonly built in 12-, 18- and 24-inch depths. The 24-inch depth matches a standard base cabinet, so a deep pantry finishes flush with the base run and holds what shallow shelves cannot, such as a stand mixer, a case of seltzer or a stockpot. The 12-inch depth matches a standard wall cabinet and suits cans, jars, cereal boxes and baking supplies, which rarely need more than one row.
If most of what you plan to store is bulky, go deep and pay for hardware that brings the contents forward. If most of it is small packaged food, go shallow and skip the hardware, because a 12-inch shelf already shows you everything on it.
Common tall pantry cabinet sizes
As a reference point, one stock manufacturer's specification guide lists its 24-inch-deep tall pantry in 18- and 24-inch widths and in 84-, 90- and 96-inch heights. In that guide the 18-inch model has an upper and a lower door, and the 24-inch model has two pairs of doors. Other lines add widths on either side of those, which is why the line you pick should set the plan and not the other way around.
Height is chosen to line up with the wall cabinets. In standard cabinet sizing, an 84-inch tall cabinet aligns with 30-inch wall cabinets, a 90-inch with 36-inch wall cabinets and a 96-inch with 42-inch wall cabinets. If you have not settled the upper cabinets yet, our comparison of 30-, 36- and 42-inch wall cabinet heights covers that decision, and the pantry height follows from it.
Width is a trade-off between capacity and where the cabinet can go. An 18-inch pantry fits beside a refrigerator or at the end of a short run and still takes a roll-out tray. A 24-inch pantry holds wider items, but it takes two feet of wall that could have been base cabinet and countertop.
Pantry cabinet configurations compared
| Configuration | Works best for | Watch for |
|---|---|---|
| Fixed or adjustable shelves, 24 in. deep | Small appliances, bulk paper goods | Food lost at the back of each shelf |
| Roll-out trays behind doors | Mixed groceries, heavy items kept low | Two motions to reach anything, trays narrower than the opening |
| Pull-out pantry frame | Narrow cabinets, cans and bottles | Needs a clear aisle in front, all the weight rides on one set of slides |
| Shallow pantry wall, 12 in. deep | Cans, jars and dry goods one row deep | Will not take large appliances, needs wall length |
Roll-out trays in a tall pantry cabinet
A roll-out tray is a shallow drawer box mounted on slides inside the cabinet, behind the door. You open the door, pull the tray, and the back of the shelf arrives at the front. Manufacturers sell them by cabinet width. One stock specification guide, for example, lists roll-outs for cabinets from 12 to 36 inches wide, made for 24-inch-deep boxes, with mounting kits ordered alongside.
Trays do cost you something. The slides and the clearance needed to pass the door hinges make each tray narrower than the cabinet opening, and every tray adds to the order. A sensible split is trays from the floor to about chest height, where depth is the problem, and plain adjustable shelves above that, where you cannot look down into a tray anyway. Put the heavy things low. The KCMA A161.1 performance standard tests shelves and drawers at 15 pounds per square foot, which is a useful sanity check when you are deciding where the flour, the oil and the canned goods go.
Pull-out pantry cabinets
A pantry cabinet with pull-outs of the full-height kind works differently. The door front is fixed to a tall frame of shelves or baskets, and the whole unit glides out of the box so you can reach it from both sides. This is the best use of a narrow tall cabinet, where a hinged door plus trays would leave little usable width.
Two checks apply. The unit needs open floor in front of it for its full travel, so it should not face an island seat or sit in the path to the range. And a fully loaded frame is heavy, so the weight limit for the hardware (set by the hardware maker, and stated in the accessory specification) decides whether it is the place for canned goods or for lighter boxes and bottles. Pull-out frames and the other built-in fittings are covered in our guide to organizers ordered with the cabinets.
Utility cabinets and shallow pantry walls
A utility cabinet is a tall cabinet ordered with an open interior, or with only a few shelves, for a broom, a vacuum, a step stool or an ironing board. Decide this when you order. A tall cabinet set up for food has a fixed shelf partway up that a broom handle cannot pass, and removing it later is not always possible.
A shallow pantry wall is a run of 12-inch-deep tall cabinets on a wall that cannot take full-depth cabinetry, such as the wall opposite the main run or the side of a passage. It stores packaged food in half the floor depth of a standard pantry. Whether your room has a wall like that is a layout question, and it is one of the moves in our article on getting more storage from the same footprint. In a compact room, the ideas in our small kitchen cabinet guide apply as well.
Four checks before a pantry cabinet goes on the order
- Ceiling height. A tall cabinet is carried in on its back and tipped upright, and its diagonal is longer than its height. One manufacturer's specification gives a minimum ceiling of 86 1/2 inches to stand up an 84-inch-high, 24-inch-deep cabinet, and notes that its tallest models ship with a separate toe kick so they can be raised in a room no taller than the cabinet. Soffits and low ceilings change the answer, as explained in our piece on cabinet design for low ceilings.
- Door swing. A pantry door next to a wall or a deeper appliance needs a filler strip on the hinge side or it will not open fully. A typical manufacturer figure is at least 1 inch beside full overlay doors, so check the one for your line.
- Position in the run. A tall cabinet ends a countertop. Placed at the end of a run it costs nothing. Placed in the middle it splits the prep surface in two and adds exposed sides that need finished panels.
- What goes inside. Write down the tallest and the heaviest things you plan to store. Shelf spacing and tray count are set from that list, and they are much easier to get right on paper than after delivery.
Try the pantry in your own floor plan
Pantry decisions are hard to judge from a showroom display, because the right answer depends on your walls, your ceiling and where the refrigerator sits. Aqua Kitchen's free 3D design service starts with a measure of your room, so you can ask to see a deep pantry beside the refrigerator and a shallow one on the opposite wall before choosing between them. The tall cabinet sizes available depend on the line, and you can compare lines in our kitchen cabinet collection.
