Sample board with a matte black faucet, wood grain, white stone and color swatches
Bülent September 28, 2026

What to Bring to a Kitchen Cabinet and Countertop Showroom Appointment

Bring six things to a kitchen showroom appointment: rough room measurements, photos of every wall, your appliance models or spec sheets, a few pictures of kitchens you like, physical samples of anything that is staying, and a budget range. With those on the table, a first visit can go straight to layout and pricing. Without them, most of the visit goes to questions you could have answered at home, and the real conversation waits for a second trip.

The checklist

  • A sketch of the room with wall lengths, ceiling height, and window and door positions
  • Photos or a short video of the whole kitchen
  • Appliance model numbers or the manufacturers' installation guides
  • The sink and faucet you plan to use, if you have chosen them
  • Saved photos of kitchens you like, and a list of what bothers you about the one you have
  • Samples of finishes that are staying: flooring, paint color, backsplash tile, or a cabinet door if only the countertops are changing
  • A budget range and your target dates
  • Everyone who has a say in the decision

Measurements: rough is fine for a first visit

A hand sketch on graph paper does the job. Measure each wall from corner to corner. Mark every window and door with its width and its distance from the nearest corner, and note the height of each window sill off the floor. Write down the ceiling height and the depth of any soffit above the current cabinets. Then mark where the sink plumbing, the gas line and the range hood duct come through, because those are the expensive things to move.

Your numbers do not need to be perfect. They need to be close enough to draw a layout and price it. At Aqua Kitchen, designers take their own measurements and build a 3D model of your room as part of the free 3D kitchen design service, and they revise it with you, with no obligation. If you want your sketch to be as useful as possible, our guide on how to measure a kitchen for cabinets shows what to record and in what order.

If you are replacing only the countertops, sketch the cabinet runs from above with the length and depth of each run, the island size, and the positions of the sink and cooktop. That is usually enough for an estimate. The final dimensions come from a digital template taken on site once the cabinets are set and level.

Photos that answer what measurements cannot

Take one photo of each wall straight on, one of each corner, one of the ceiling showing soffits and light fixtures, and one of the floor where it meets the next room. Open the sink base and photograph the plumbing inside. A slow video walk around the room ties the stills together.

Photos catch what nobody thinks to measure: a heating vent in a toe kick, a window that sits off center, a bulkhead hiding a duct. A designer who spots one of those at the first meeting can draw around it, which beats finding it on installation day.

Appliance specifications

Cabinets are sized around appliances, so a layout cannot be finished without them. For each appliance you are buying, bring the model number or the manufacturer's installation guide, which lists the cutout width, height and depth along with required clearances. The refrigerator is the one to pin down first, since its height, its depth with the doors on and the direction the doors swing decide the cabinets beside and above it. Add the range or the cooktop and wall oven, the dishwasher, the hood, and wherever the microwave is going.

For appliances you are keeping, the model number is on a label inside the door or the frame. If you have not chosen yet, bring the sizes you are deciding between so the designer can show you what each choice does to the cabinet run.

The sink and faucet belong on this list too. Countertop cutouts are sized to the actual fixtures, and at Aqua Kitchen both have to be on site before the countertop template is taken. Knowing the sink model early also settles the width of the sink base cabinet.

Inspiration, and a list of complaints

A handful of saved photos is plenty. For each one, be ready to say what you like about it, whether that is the door style, the color, the island or the hardware. A photo with no comment leaves the designer guessing which of ten things caught your eye.

The list of complaints is worth more than the photos. Typical entries are too few drawers near the range, nowhere to put the trash, a corner cabinet nobody can reach, and a dishwasher door that blocks the sink when it is open. Those are layout problems, and a layout is what you came to get.

Samples of what is staying

Cabinet and stone colors are judged against what sits next to them. If the floor is staying, bring a spare plank or tile, or a photo of it taken in daylight. Bring the paint chip or the color name for the walls. If you are keeping the cabinets and changing the countertops, bring a door or a drawer front. Use Natural Stone, the Natural Stone Institute's consumer campaign, makes the same point in its advice on selecting stone, where it suggests taking paint samples, cabinet doors, backsplash tiles or faucets along to narrow the choice.

These samples matter most in the slab yard, where you hold them against a full slab. A small chip of stone will not tell you the same thing, for reasons explained in our article on why samples and full slabs look different. Slab yards are working spaces, so closed-toe shoes are a sensible choice.

A budget range and your constraints

State a range at the start. It does not commit you to anything, and it changes what you are shown. Cabinet lines differ in box construction, door core and drawer type, and the range tells a designer which lines to put side by side for you. Keeping it to yourself usually means sitting through options that were never going to fit. Aqua Kitchen offers financing options, including 0% APR plans for qualified buyers, subject to credit approval, so ask about them if that affects your number.

Bring your constraints as well. That means the date you need the kitchen working, any building or association rules about deliveries and work hours, and the names of the trades you already have. Aqua Kitchen designs the layout and supplies, fabricates and installs the cabinets and countertops. Plumbing, electrical, flooring and tile are handled by your own contractors, so the designer needs to know who they are and when they are available. If you have a general contractor, bring them along.

Which appointment to book

Aqua Kitchen has a booking page for each of three formats: the showroom appointment, the online appointment and the in-home appointment. When you book, ask what that format covers and what to have ready for it. As general advice, a sketch, photos and an appliance list can be shared as files for a remote first conversation, while physical samples only help in person. Full slabs are chosen in person at the slab yard, so leave color decisions for that visit.

Visiting Aqua Kitchen in Wayne

The showroom, the slab yard and the fabrication shop are at one address, 1107 Route 23 South, Wayne, NJ 07470, so one visit can cover cabinet lines and slab selection. Hours are Monday to Friday 9 am to 6 pm and Saturday 10 am to 6 pm. The showroom is closed on Sunday. Call 973-706-5926 or use the contact page if you have a question about what to bring for your particular project. For background on the stone side of the visit, our article on working with a countertop fabricator during kitchen design is a useful read beforehand.

Share